Hi All,
Is there such thing as a cable loom but with different connectors on. So instead of 8 jack to jacks, there are MIDI, jack etc.
Cheers
Jake
Printable View
Hi All,
Is there such thing as a cable loom but with different connectors on. So instead of 8 jack to jacks, there are MIDI, jack etc.
Cheers
Jake
yeah i suppose might just get some stuff to go round the cables i suppose i will have some kind of loom! Do you know where i could get some stuff to go round them?
Cheers
Jake
I make up 8-24 way looms with all sorts of connectors.
I have one that runs from my pedalboard to the amp that does audio IO (including fx loop) as well as channel switching etc.
I don't like tying cables together- better to get a sheathed (ooh-err) 8 way multi-core cable, cut it to length and then solder the connectors onto it.
I always carry a spare though in case something goes wrong.
You DON'T want to be at a gig and trouble shooting an 8 way loom.
depends how thick it is. if it's not very thick you can shove the cables into a split pipe-lagging foam tube, or another old classic is to use an old vacuum cleaner house split down the side with a knife
or use the default lacing cord... if you can tie your own shoe laces it should be no problem:
http://en.wikipedia.org/wiki/Cable_lacing
you can get it from any maplins type shop
oh btw do not runs mains current cable parallel with signal cables..