£25 ono inc postage - Paypal gift or cash/bank transfer
USES: Can be used to reveal tone-sucking pedals via A/B selection between your guitars straight signal path and the effect in question or, as a permanent bypass box for your vintage stereo pedals you do not wish to modify internally for true bypass.
EXAMPLES: By placing the Stereo True Bypass box in front of a stereo effect, you will still be able to use the effect into two amplifiers. In bypass mode, your signal will be cleanly split in parallel into both amps. (Like a "Y" cable) So when the bypass box's led is off, your instrument will be split to both of the bypass box's outputs. When the bypass box's led is on, your signal will flow in and out of your bypass box to stereo effect and act as it would normally if you did not have it connected to this bypass box.
INGREDIENTS: Aluminum enclosure, (1) 4PDT "Knitter" switch, 22 Gauge Silver Plated Military Spec. Wiring, (6) Switchcraft jacks, and your choice of colors for your LED's.
LEDS: 9V battery or 9V DC jack for LED power is at your option. For the 9V DC Jack, these units require a 9V AC adapter with a Boss/Ibanez style 2.1mm barrel plug. If you do not have one, we have these in the "Accessories" section. (Unit will work without LED's. The LED circuit in any Loop-Master™ unit does not affect tone.)
Last edited by lento; 28th August 2012 at 12:22 PM.