Downloading to Vox Tonelab

[BarryH]

I've dowloaded the Sound Editor for the Vox Tonelab, anyone help me with the connections needed between the Tonelab and my PC?

There were no cables with my Tonelab when I bought it. Just the PSU.

Barry

[jonboyrob]

I've dowloaded the Sound Editor for the Vox Tonelab, anyone help me with the connections needed between the Tonelab and my PC?

There were no cables with my Tonelab when I bought it. Just the PSU.

Barry

Should be a standard usb cable, just check the vox site for details.

[nocaster]

Should be a standard usb cable, just check the vox site for details.

Or look on the back of the Tonlelab?!

K

[Sir Axeman]

My Tonelab LE didnt have any USB nor did my old Tonelab SE...the only conceiveable way I can see is from a midi cable from your soundcard or Audio interface into the Tonelab.

[BarryH]

Nothing on the Vox site or in the manual at all.

I thought it would work the same way as my GNX3000, a simple cable out to the USB port.

Barry

[sammo303]

Must be through the midi port then. Many synths are connected in this way, not to mention Pod 2.0, etc. Without doing any research or anything, I'd say that unless you find a usb port, it'll be done through MIDI.

[Sir Axeman]

Nothing on the Vox site or in the manual at all.

I thought it would work the same way as my GNX3000, a simple cable out to the USB port.

Barry

So you managed to find a USB port on your Tonelab? Which one have you got?

[BarryH]

A simple cable out to the USB (on the PC)

It's the blue Tonelab with the valve in the top right corner.

Barry

[Danny1969]

I use a midi cable from Tonelab to midi port on PC. You can load in new patches and tweak all you want, it's a great bit of software.

[BarryH]

Thanks Danny