Pickups, rings & plates

[guitarcookie1]

Got a few things to clear out of my spares box:

Gibson Burstbucker Pro - £45 delivered

Bridge position, chrome cover, excellent condition with plenty of wire.




Single Coil - £5 delivered

I believe that this was taken from a Squier but not sure which position. Black cover, excellent condition and about 6" of wire.



Single Coil - SOLD

I believe this one came from a Japanese Fender Strat; possibly the middle position. Good condition with an aged white cover (was once white by the looks of things) and about 8" of wire.

[guitarcookie1]

Pickup rings - £3 delivered

Both chrome finished - one is metal and flat, the other is chromed plastic and has a slight angle (like a LP neck humbucker surround). Both excellent condition.



Aged white Strat pickguard - £3 delivered

I believe this came from a c1997 Fender Japanese Strat and was originally HSS configuration.

It has been modified at some point to HSH configuration and may have been fitted to a number of different strats as some of the screw holes are messy.

The mod to the neck hole is quite untidy, as is the hole for the volume pot and it has also got holes for pickup rings around the humbucker holes - none of this is noticable if you use pickup rings and fit a volume knob.



Black Strat Pickguard - £6 delivered

No idea of its make/origin but is in good condition with some playing scratches. HH configuration with 1 x Vol & 1 x tone holes (the tone hole is a bit untidy but you can't see this with a knob fitted).

[guitarcookie1]

Or, long shot I know, swap the lot for your Fender Strat neck (rosewood 'board).

[guitarcookie1]

Bump

[guitarcookie1]

Friday bump